Enum AeronSystemCounterType 

#[repr(u32)]
pub enum AeronSystemCounterType {
    BytesSent = 0,
    BytesReceived = 1,
    ReceiverProxyFails = 2,
    SenderProxyFails = 3,
    ConductorProxyFails = 4,
    NakMessagesSent = 5,
    NakMessagesReceived = 6,
    StatusMessagesSent = 7,
    StatusMessagesReceived = 8,
    HeartbeatsSent = 9,
    HeartbeatsReceived = 10,
    RetransmitsSent = 11,
    FlowControlUnderRuns = 12,
    FlowControlOverRuns = 13,
    InvalidPackets = 14,
    Errors = 15,
    ShortSends = 16,
    FreeFails = 17,
    SenderFlowControlLimits = 18,
    UnblockedPublications = 19,
    UnblockedCommands = 20,
    PossibleTtlAsymmetry = 21,
    ControllableIdleStrategy = 22,
    LossGapFills = 23,
    ClientTimeouts = 24,
    ResolutionChanges = 25,
    ConductorMaxCycleTime = 26,
    ConductorCycleTimeThresholdExceeded = 27,
    SenderMaxCycleTime = 28,
    SenderCycleTimeThresholdExceeded = 29,
    ReceiverMaxCycleTime = 30,
    ReceiverCycleTimeThresholdExceeded = 31,
    NameResolverMaxTime = 32,
    NameResolverTimeThresholdExceeded = 33,
    AeronVersion = 34,
    BytesCurrentlyMapped = 35,
    RetransmittedBytes = 36,
    RetransmitOverflow = 37,
    ErrorFramesReceived = 38,
    ErrorFramesSent = 39,
    DummyLast = 40,
}

Variants

BytesSent = 0

Running total of bytes sent for data over UDP, excluding IP headers.

BytesReceived = 1

Running total of bytes received for data over UDP, excluding IP headers.

ReceiverProxyFails = 2

Failed offers to the receiver proxy suggesting back-pressure.

SenderProxyFails = 3

Failed offers to the sender proxy suggesting back-pressure.

ConductorProxyFails = 4

Failed offers to the driver conductor proxy suggesting back-pressure.

NakMessagesSent = 5

Count of NAKs sent back to senders requesting re-transmits.

NakMessagesReceived = 6

Count of NAKs received from receivers requesting re-transmits.

StatusMessagesSent = 7

Count of status messages sent back to senders for flow control.

StatusMessagesReceived = 8

Count of status messages received from receivers for flow control.

HeartbeatsSent = 9

Count of heartbeat data frames sent to indicate liveness in the absence of data to send.

HeartbeatsReceived = 10

Count of heartbeat data frames received to indicate liveness in the absence of data to send.

RetransmitsSent = 11

Count of data packets re-transmitted as a result of NAKs.

FlowControlUnderRuns = 12

Count of packets received which under-run the current flow control window for images.

FlowControlOverRuns = 13

Count of packets received which over-run the current flow control window for images.

InvalidPackets = 14

Count of invalid packets received.

Errors = 15

Count of errors observed by the driver and an indication to read the distinct error log.

ShortSends = 16

Count of socket send operations which resulted in less than the packet length being sent.

FreeFails = 17

Count of attempts to free log buffers no longer required by the driver that are still held by clients.

SenderFlowControlLimits = 18

Count of the times a sender has entered the state of being back-pressured when it could have sent faster.

UnblockedPublications = 19

Count of the times a publication has been unblocked after a client failed to complete an offer within a timeout.

UnblockedCommands = 20

Count of the times a command has been unblocked after a client failed to complete an offer within a timeout.

PossibleTtlAsymmetry = 21

Count of the times the channel endpoint detected a possible TTL asymmetry between its config and a new connection.

ControllableIdleStrategy = 22

Current status of the ControllableIdleStrategy if configured.

LossGapFills = 23

Count of the times a loss gap has been filled when NAKs have been disabled.

ClientTimeouts = 24

Count of the Aeron clients that have timed out without a graceful close.

ResolutionChanges = 25

Count of the times a connection endpoint has been re-resolved resulting in a change.

ConductorMaxCycleTime = 26

The maximum time spent by the conductor between work cycles.

ConductorCycleTimeThresholdExceeded = 27

Count of the number of times the cycle time threshold has been exceeded by the conductor in its work cycle.

SenderMaxCycleTime = 28

The maximum time spent by the sender between work cycles.

SenderCycleTimeThresholdExceeded = 29

Count of the number of times the cycle time threshold has been exceeded by the sender in its work cycle.

ReceiverMaxCycleTime = 30

The maximum time spent by the receiver between work cycles.

ReceiverCycleTimeThresholdExceeded = 31

Count of the number of times the cycle time threshold has been exceeded by the receiver in its work cycle.

NameResolverMaxTime = 32

The maximum time spent by the NameResolver in one of its operations.

NameResolverTimeThresholdExceeded = 33

Count of the number of times the time threshold has been exceeded by the NameResolver.

AeronVersion = 34

The version of the media driver.

BytesCurrentlyMapped = 35

The total number of bytes currently mapped in log buffers, the CnC file, and the loss report.

RetransmittedBytes = 36

A minimum bound on the number of bytes re-transmitted as a result of NAKs.\n///\n/// MDC retransmits are only counted once; therefore, this is a minimum bound rather than the actual number\n/// of retransmitted bytes. Note that retransmitted bytes are not included in the BytesSent counter value.

RetransmitOverflow = 37

A count of the number of times that the retransmit pool has been overflowed.

ErrorFramesReceived = 38

A count of the number of error frames received by this driver.

ErrorFramesSent = 39

A count of the number of error frames sent by this driver.

DummyLast = 40

Trait Implementations

impl Clone for AeronSystemCounterType

fn clone(&self) -> AeronSystemCounterType

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for AeronSystemCounterType

impl Debug for AeronSystemCounterType

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Eq for AeronSystemCounterType

impl Hash for AeronSystemCounterType

fn hash<__H: Hasher>(&self, state: &mut __H)

Feeds this value into the given Hasher.

fn hash_slice<H>(data: &[Self], state: &mut H)

where H: Hasher, Self: Sized,

Feeds a slice of this type into the given Hasher.

impl PartialEq for AeronSystemCounterType

fn eq(&self, other: &AeronSystemCounterType) -> bool

Tests for self and other values to be equal, and is used by ==.

fn ne(&self, other: &Rhs) -> bool

Tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.

impl StructuralPartialEq for AeronSystemCounterType

impl TryFrom<i32> for AeronSystemCounterType

type Error = AeronCError

The type returned in the event of a conversion error.

fn try_from(value: i32) -> Result<Self, Self::Error>

Performs the conversion.